Rechargeable Shock Remote LCD Pet Training Collar

Rechargeable and waterproof, this pet dog training collar is the most effective and safest tool for training pet.

The collar comes with four modes: shock, vibration, beep and light. The adjustable collar can meet needs for pets in different sizes. Besides, the tester included is ideal for testing the collar before using. With this helper, your training will be convenient and easy. What's more, The trainning collar can be used even in the bad weather training and keep the collar against wet inside. 

The collar features power saving design with automatic standby and memory function is perfect for keep your pet in good behavior.

• Brand new and high quality
• 300 meters (328 yard almost) effective range within control
• Rechargeable and easy to use, ergonomic transmitter
• Waterproof for bad weather training and keep the collar against wet inside
• Rheostat dial that allows for gradual increases in stimulation intensity with no jumps between 0-100 levels (be altered by up and down button)
• 4 training modes: Static shock / vibration / beep / light
• Remote lcd display
• Can be used for 1 or 2 receivers
• A tone button activates a tone on the collar receiver
• Featured power saving design with automatic standby and memory function
• Power saving: The collar receiver will turn off if it is unused for 4 min
• The transmitter will go into standby mode if there is no operation after 20 seconds and turn off after 2 min
• Ce approved
• Prepare the remote transmitter
• Charge the remote transmitter: 
• 1. Connect the charger connector to the charging jack
• 2. Plug the charger into a standard outlet
• 3. The red button on the transmitter will be lighted
• 4. Charge the transmitter at least 6 hours for the first charger
• 5. After fully charged,the red led will be turned off automatically
• How to use the transmitter: 
• 1. To turn on/off the transmitter, hold the transmitter for 5 seconds
• 2. Set to the different modes by pressing the mode button-the lcd images will change
• 3. Press the up and down buttons on right hand side to set level
• 4. Choose the different channels for 1 or 2 receivers
• 5. The transmitter will go into standby mode if not operated for 20 seconds and will turn off if not operated for 2 minutes
• 6. In standby mode, press any button (except led light button) to wake it up
• Prepare the collar receiver
• Charge the collar receiver: 
• 1. Connect the charger connector to the charging jack
• 2. Plug the charger into a standard outlet
• 3. The red led light inside the collar receiver will be lighted
• 4. Charge the collar receiver at least 6 hours for the first charge
• 5. After fully charged, the red led light will be turned off automatically
• 6. When charging is complete, replace the rubber cover
• Connect the transmitter with the collar receiver: 
• 1. Trun on the transmitter and choose 1 or 2 channels to encode
• 2. Lift the reset part of rubber cover in the collar receiver
• 3. With a pen or paper clip, press the reset button inside the collar receiver
• 4. After a beep from the collar receiver, press the launch button on transmitter immediately
• 5. The collar receiver will beep-it is now encoded to the transmitter
• 6. After encoding is completed, replace the rubber cover back
• How to check the static shock is working: 
• 1. Use the test light led-provided
• 2. Attach the light to the metal probes-select static mode – you can see static symbol on the screen-press the launch button-the led will flash on
• 3. Select a low number on the lcd display-put your fingers on the metal probes and press the launch button
• Note: 
• 1. The lifetime of the batteries vary according to how often you use the product
• 2. The valid distance of remote control means the straight-line distance between the transmitter and the collar receiver without obstacles. If there are
• Interference signals or signal screening around, the actual remote control distance may vary
• 3. This product is for pet training. Only by training, the pet can understand the intention of its owner
• 4. Tranining sessions should be kept positive and short, about 10-15 minutes long each time